MIT Uses Nanotech to Miniaturize Electronics Into Spray Form


The ‘aerosolized electronics’ are so small they can be sprayed through the air. MIT researchers say the tiny devices could be used to in oil and gas pipelines or even in the human digestive system to detect problems.

Researchers at MIT have built electronics so small they can be sprayed out like a mist.

The electronics are about the size of a human egg cell, and can act as tiny manmade indicators with the ability to sense their surroundings and store data.

On Monday, the team of MIT researchers published their findings, which involve grafting microscopic circuits on “colloidal particles.” These particles are so tiny —from 1 to 1000 nanometers in diameter— that they can suspend themselves indefinitely in a liquid or air.

To create the tiny machines, the MIT researchers used graphene and other compounds to form circuits that can chemically detect when certain particles, say some poisonous ammonia, are nearby and conductive. The circuits were then grafted on colloidal particles made out of a polymer called SU-8. For power, the machines rely on a photodiode that converts light into electrical current.

“What we created is a state machine that can be in two states. We start with OFF and if both light AND a chemical is detected, the particle changes its state to ON,” said Volodymyr Koman, one of the researchers, in an email. “So, there are two inputs, one output (1-bit memory) and one logical statement.”

In their experiments, the researchers successfully used the tiny electronics to identify whether toxic ammonia was present in a pipeline by spraying the machines in aerosolized form. In another experiment, the electronics were able to detect the presence of soot. As a result, the researchers say the technology could be handy in factories or gas pipelines to detect potential problems.

Another use case is for medical care. The tiny machines could be sent through someone’s digestive system to scan for evidence of diseases.

However, one big limitation with the “aerosolized electronics” is they can’t communicate wirelessly. All data is stored on the tiny machines, which can be scooped out from a liquid or caught in air, and then scanned to access the results.

To make them easy to spot (at least under a microscope), the electronics are fitted with tiny reflectors. But in the future, the MIT researchers hope to add some communication capabilities to the machines, so that all data can be fetched remotely.

RELATED

DARPA Is Working on Insect Scale Disaster Robots

“We are excited about this, because on-board electronics has modular nature, i.e. we will be able to extend number of components in the future, increasing complexity,” Koman said.

The researchers published their findings in Nature Nanotechnology on Monday.

Editor’s note: This story has been updated with comment from one of the researchers.

Advertisements

2 comments on “MIT Uses Nanotech to Miniaturize Electronics Into Spray Form

  1. charles000 says:

    I recall 20+ yrs ago when this was proposed as a theoretical concept . . .
    At that time I was a participating member of the Foresight Institute, and this was one of the general concepts that many in that group (including myself) thought was eventually inevitable, though many outside the esoteric arena of nanotech futurism thought this was absurdly ridiculous.

    Well, here we are . . .

    Like

Please leave us your comments and any suggestions. Thanks! Administrator at GNT

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s